Measurement of the apical anatomy of immature maxillary central incisors using cone-beam computed tomography.

OBJECTIVE: To investigate the CBCT findings of the apical anatomy of immature maxillary central incisors. METHODS: CBCT images of 100 immature maxillary central incisors in Nolla 8 and 100 immature maxillary central incisors in Nolla 9 were collected. The mesiodistal and carniocaudal diameters of the apical foramen of immature maxillary central incisors were measured by software included with CBCT, as well as the mesiodistal, carniocaudal and facioligual diameters of the apical shadow. The apical shadow and apical foramen diameters were compared between Nolla 8 and Nolla 9. Data were analyzed using the MedCalc software package. RESULTS: For immature maxillary central incisors, the mesiodistal and facioligual diameters of the apical foramen were 2.75±0.68 mm and 3.28±0.74 mm in Nolla 8 and 1.50±0.51 mm and 1.92±0.79 mm in Nolla 9. The mesiodistal, facioligual and carniocaudal diameters of the apical shadow were 3.84±0.73 mm, 4.49±0.68 mm and 3.41±1.27 mm in Nolla 8 and 2.76±0.60 mm, 3.41±0.80 mm and 2.06±0.65 mm in Nolla 9, respectively. CONCLUSIONS: The immature maxillary central incisors in Nolla 8 have a larger apical shadow and apical foramen than those in Nolla 9. The apical region of the maxillary central incisors in Nolla 8 was more likely to have a broad, blurred lamina dura. With the development of the apical foramen, the lamina dura in the apical region tended to be clear and sharp. CLINICAL SIGNIFICANCE: To our knowledge, this is the first study to radiologically analyse the in vivo anatomy of the apical foramen and apical shadow of immature maxillary central incisors. The results of this study provide a more detailed understanding of the apical anatomy of the immature maxillary central incisor for the diagnosis and treatment of apical lesions.

Relación entre el seno maxilar y ápices de dientes postero- superiores con tomografía computarizada de haz cónico / Relationship between the maxillary sinus and apices of posterior-superior teeth using cone beam computed tomography

El conocimiento de la relación entre el seno maxilar y los ápices de los dientes posterosuperiores es fundamental para evitar complicaciones frente a distintos tratamientos. Estudio descriptivo de corte transversal, con muestra por conveniencia de 383 imágenes de raíces de dientes posterosuperiores obtenidas por medio de tomografía computarizada de haz cónico (TCHC) de un centro radiológico en Viña del Mar, Chile. Cada raíz fue clasificada según su relación vertical con el seno en 4 categorías (0: ápice no se encuentra en contacto con contorno inferior del seno; 1: ápice en contacto con seno; 2: ápice lateralmente al seno; 3: ápice se protruye en seno). Además se midió su distancia en mm. Los datos fueron analizados con estadística descriptivas. El diente más lejano al seno maxilar fue el primer premolar superior (4.2 mm), seguido por el segundo premolar superior (1 mm). En el primer molar superior la raíz más lejana fue la mesio-vestibular (MV) 1mm, seguida por la raíz disto-vestibular (DV) 0.6mm y la raíz palatina (P) -1mm. En el segundo molar superior la raíz más lejana fue P 0.4mm, luego la DV 0.3mm, y MV -0,11mm. En cuanto a las categorías, se observó que la mayoría de las raíces se encuentran alejadas del seno siendo la raíz P del primer molar superior y la raíz MV del segundo molar superior las que se encuentran mayormente protruidas (42 % y 26 % respectivamente). El primer premolar es el diente posterosuperior que se encuentra más alejado del seno maxilar y a medida que se avanza hacia posterior hay tendencia a disminuir la distancia entre los ápices y el seno maxilar.

SUMMARY: Knowledge of the relationship between the maxillary sinus and the apices of the upper posterior teeth is crucial to avoid complications when considering different treatments. A descriptive cross-sectional study was carried out, with a convenience sample of 383 images of upper posterior teeth roots, obtained by means of cone beam computed tomography (CBCT) from a radiological center in Viña del Mar, Chile. Each root was classified according to its vertical relationship with the sinus into 4 categories (0: apex is not in contact with the lower contour of the sinus; 1: apex is in contact with the sinus; 2: apex laterally to the sinus; 3: apex protrudes in sinus). In addition, its distance was measured in mm. The data were analyzed with descriptive statistics. The tooth farthest from the maxillary sinus was the maxillary first premolar (4.2 mm), followed by the maxillary second premolar (1 mm). In the upper first molar, the most distant root was the mesiobuccal (MV) 1mm, followed by the distobuccal root (DV) 0.6mm and the palatal root (P) -1mm. In the upper second molar, the furthest root was P 0.4mm, then DV 0.3mm, and MV -0.11mm. In reference to the categories, it was observed that most of the roots are far from the sinus, with the P root of the first upper molar and the MV root of the second upper molar being the most protruding (42 % and 26 % respectively). The first premolar is the posterior maxillary tooth that is furthest from the maxillary sinus and as one advances posteriorly there is a tendency to decrease the distance between the apices and the maxillary sinus.

Working length variation during multiple-visit endodontic treatment: An observational study.

This study investigated variation in working length during multiple-visit endodontic treatment. Patients (N = 106) with pulpitis or pulp necrosis, with or without apical periodontitis, were included. During the first appointment, glide path was performed with ProGlider and shaping with ProTaper Next. Working length was detected four times. Working length was then re-recorded prior to filling during the second appointment and a 0.5 mm threshold was selected as the minimum clinically meaningful variation. A logistic regression model was used to evaluate the impact of tooth anatomy, preoperative pulp status, apical periodontitis and lesions of endodontic origin on working length variation. Working length varied between first and second appointments in 34% of patients. The presence of apical periodontitis was the only variable significantly associated with variation in working length (p = 0.011). These data suggest that working length should be re-checked prior to root canal filling to prevent procedural errors.

Internal morphology of distal roots of mandibular first molars revealed by computed microtomography.

To evaluate the internal morphology of 100 distal roots of mandibular first molars using micro-CT. Teeth were scanned to characterise: Vertucci type, root length, canal shape, presence and location of accessory canals, and the number of foramina at 4 mm from the apex, presence of root isthmus and the length from the primary canal to the apical foramen. Vertucci type I was found in 57% of cases, followed by V (27%). The most common cross-section 1 mm from the apex was oval (49%) and circular (38%). The average root length was 16.06 mm (16.61-19.02 mm). The mean foramen size was 0.32 and 0.53 mm for the minor and major diameters, respectively. The volume, surface area and SMI were 7.84 mm3 , 68.87 mm2 and 1.52 mm, respectively. Root isthmi were found in 47% of the samples, and the length mean from the primary canal to the apical foramen was 2,03 mm. The internal morphology of the distal roots of mandibular first molars may be complex and shows variations.

Variations in the morphology of apical constriction affecting electronic readings: An in vitro investigation using 3D-printed tooth models.

We investigated the interference of apical constriction position and diameter on the accuracy of electronic apex locators using 3D-printed tooth models. Single-rooted tooth models with the same length, canal taper and major foramen, but variation in apical constriction position or size, were designed and 3D-printed. A mounting model was custom-made for precise measurement of both marks (0.5 and APEX/0.0) of two electronic apex locators. The electronic measurements of both devices were correlated significantly to the major foramen rather than apical constriction. The mean measurements of the group with 0.45 mm in apical constriction width were significantly shorter than those of the other groups for both marks of the two devices (p < 0.05). The variations in apical constriction position and width negatively affected the precision of the 0.5 mark of the tested devices. The 0.0 or APEX mark was consistently located the major foramen.

Panoramic radiography and cone-beam computed tomography to measure distances between root apexes and anatomical structures / Radiografía panorámica y tomografía computarizada de haz cónico para medir distancias entre ápices radiculares y estructuras anatómicas

Aim: To compare the accuracy of the panoramic radiography with cone-beam computed tomography (CBCT) scans in measuring the distances between root apexes and the adjacent anatomical structures including the maxillary sinus and the mandibular canal. Material and Methods: A total of 200 CBCT scans (100 maxillary and 100 mandibular) from patients who also had corresponding panoramic radiography were selected. Linear measurements (in mm) presenting centralized image were made between the apexes of the maxillary teeth and the inferior wall of the maxillary sinus, and between the apexes of the mandibular teeth and the superior border of the mandibular canal by using specific software for panoramic radiography and the measurements on the coronal sections in CBCT scans. Data were submitted to inferential statistical analysis and Student's t-test for comparison between measurements. Results: CBCT scans were significantly more accurate than panoramic radiography to measure the distances between the apexes of the maxillary teeth and the inferior wall of the maxillary sinus (p<0.05) and between the apexes of the mandibular teeth and the superior border of the mandibular canal or mental foramen (p<0.05). Conclusion: CBCT scans present more accurate measurements than panoramic radiography.

Objetivo: Comparar la precisión de la radiografía panorámica con las exploraciones de la tomografía computarizada dental de haz en cónico (CBCT) para medir las distancias entre los vértices radiculares y las estructuras anatómicas adyacentes, incluidos el seno maxilar y el canal mandibular. Material y Métodos: Se seleccionaron un total de 200 tomografías CBCT (100 maxilares y 100 mandibulares) de pacientes que además tenían la correspondiente radiografía panorámica. Se realizaron mediciones lineales (en mm) que presentaban imagen centralizada entre los ápices de los dientes maxilares y la pared inferior del seno maxilar, y entre los ápices de los dientes mandibulares y el borde superior del canal mandibular mediante software específico para radiografía panorámica. y las mediciones en las secciones coronales en escaneos CBCT. Los datos se sometieron a análisis estadístico inferencial y prueba t de Student para comparación entre mediciones. Resultados: Las exploraciones CBCT fueron significativamente más precisas que la radiografía panorámica para medir las distancias entre los ápices de los dientes maxilares y la pared inferior del seno maxilar (p<0,05) y entre los ápices de los dientes mandibulares y el borde superior de los dientes mandibulares. canal o agujero mentoniano (p<0.05). Conclusión: Las exploraciones CBCT presentan mediciones más precisas que la radiografía panorámica.

Evaluación radiográfica de 5000 tratamientos endodónticos realizados en premolares y molares mandibulares y maxilares en una población en Argentina / Radiographic evaluation of 5000 endodontic treatments performed on mandibular and maxillary premolars and molars in a population in Argentina

Objetivo: Evaluar radiográficamente tratamientos en- dodónticos del sector posterior de la cavidad bucal y com- parar la frecuencia de aceptabilidad en cada pieza dentaria involucrada. Materiales y métodos: Se evaluaron 5000 radiogra- fías de archivo de tratamientos endodónticos realizados apro- ximadamente entre 2005 y 2019 en premolares y molares mandibulares y maxilares en Argentina. Se consideraron tratamientos correctos e incorrectos de acuerdo con: 1) con- formación de la preparación quirúrgica; 2) límite apical de la obturación; 3) homogeneidad de la obturación. Se obtuvo la fre- cuencia absoluta y relativa de correctos e incorrectos. El aná- lisis entre frecuencias y pieza dentaria se realizó con la prueba de chi cuadrado y el cálculo del coeficiente V de Cramer. Para la comparación entre grupos de piezas dentarias se utilizó la partición del valor de chi cuadrado obtenido en los corres- pondientes grados de libertad. Nivel de significación P <0.05. Resultados: La partición del valor de chi cuadrado no mostró diferencias significativas entre primeros y segundos premolares mandibulares. Las otras comparaciones exhibie- ron diferencias significativas. Conclusiones: Un alto porcentaje de los tratamientos endodónticos de la población estudiada tiene por lo menos una condición que permite categorizarlos como incorrectos según el criterio establecido en este trabajo. Este porcentaje es más preponderante en anatomías complejas (AU)

Aim: To evaluate radiographically endodontic treat- ments performed in the posterior area of the oral cavity and compare the frequency of acceptability in each tooth involved. Materials and methods: 5,000 archival radiographs of endodontic treatments performed between 2005 and 2019 on mandibular and maxillary premolars and molars in Argentina were evaluated. The percentages of correct and incorrect treatments were considered according to 1) shaping of the preparation; 2) apical limit of the obturation; 3) homogeneity of the obturation. The absolute and relative frequencies of correct and incorrect treatments were calcu- lated. The association between these frequencies and tooth type was analyzed using the chi-square test and Cramer's V coefficient. For the comparison between groups of teeth, the partition of the chi-square value obtained in the corre- sponding degrees of freedom was used. Level of significance was P <0.05. Results: The partition of the chi-square value did not show a significant difference between the first and second lower premolars. The differences were significant in the other comparisons. Conclusions: A high percentage of the endodontic treat- ments in the study population have at least one condition war- ranting their classification as incorrect according to the crite- ria established in this study. This percentage is more prevalent in complex anatomies (AU)

Morphometric analysis of the apical foramina in extracted human teeth.

BACKGROUND: The aim of the study was to analyse the morphology of the apical foramen in permanent maxillary and mandibular human teeth. MATERIALS AND METHODS: The anatomic parameters include shapes (rounded, oval, uneven, flat and semilunar) and location (centre, buccal/labial, lingual/palatal, mesial, and distal) of the apical foramina was evaluated. The shapes and locations of apical foramen were analysed based on tooth type (central incisor, lateral incisor, canine, premolars, and molars) arch type (maxillary and mandibular), and position (anterior and posterior). All the teeth were investigated for the apical foramina shape and location using a stereomicroscope at a magnification of 10×. Descriptive statistics performed using SPSS (Version 21.0, IBM, NY, USA) at p value less than 0.05. RESULTS: The common shape of apical foramina was round (65%) and location was centre (32%). The frequency of deviation of apical was 68% in overall teeth. Apical foramina in maxillary anterior teeth showed more deviation while posterior teeth in mandibular teeth. The most common shape of apical foramina was round (65.1%) followed by (31%) and flat and semilunar shapes are very rare in studied subjects. CONCLUSIONS: The most frequent direction of deviation is the distal surface, followed by the mesial surface. The variation is more common in mandibular posterior teeth, while maxillary posteriors showed the least difference. The commonest shape of the apical foramen is of a round shape, followed by the oval. The oval shape of the apical foramen is most frequent with central incisors.

Age-related Variations at the Cementodentinal Junction: An Ex Vivo Study.

OBJECTIVE: The objective of this study was to determine the age-related anatomical changes that take place at the cementodentinal junction (CDJ). METHODS: Eighty-four teeth were extracted; 42 samples came from patients ranging in age from 18 to 30 years, and 42 came from patients aged from 40 to 60 years. Upper and lower and anterior and posterior teeth were included. Longitudinal slices were made, and 1% toluidine blue was used to stain all the samples prior to microscopic examination. Anatomical landmarks (apical foramen [AF], apical vertex, and cementoenamel junction) in the apical third were identified, and a pre-calibrated software package was employed to take digital measurements. Statistical analysis was performed by means of the Wilcoxon rank-sum test. RESULTS: The data obtained showed that there were anatomical variations in the apical third in the older patients and that these changes were related to the age of the patient. Narrower root canals and smaller CDJ diameters were found in older patients' samples. CONCLUSION: The results of this study suggest that instrumentation and obturation should take place 1 mm from the AF in older patients, and not 0.5 mm, as is usually recommended.

Endodontic length measurements using cone beam computed tomography with dedicated or conventional software at different voxel sizes.

The aim of this study is to investigate the accuracies and the agreements of the 3D Endo software, conventional CBCT software Romexis Viewer at three voxel sizes, and the EAL ProPex Pixi in endodontic length measurements. Three hundred and twenty-nine root canals in 120 intact human extracted molars were accessed. The actual lengths (AL) and electronic lengths (EL) were measured using the ruler and electronic apex locator (EAL), respectively. Teeth were scanned using the CBCT at different voxel sizes (0.075, 0.10, and 0.15 mm). Root canal lengths were measured using 3D Endo with proposed length (3D-PL) by software, corrected length (3D-CL), Romexis Viewer. The Fisher's exact test, paired t-test and Bland-Altman plots were calculated to detect the agreements of the four methods with AL measurements. The ProPex Pixi measurements obtained the highest accuracy in the range of ± 0.5 mm. There was agreement between the 3D-PL and the 3D-CL with AL measurements at voxel size of 0.15 mm and at voxel size of 0.10 mm, respectively. The CBCT Romexis Viewer measurements agreed with AL at three voxel sizes. The conventional CBCT measurements using Romexis Viewer and dedicated software did not reach to the 100% accuracy in the range of ± 0.5 mm.

Effect of Orthodontic Brackets on the Accuracy of Apex Locators: A Pilot Study.

The purpose of this study was to evaluate the effect of metal orthodontic brackets on the accuracy of electronic apex locator (EAL). The actual canal lengths (ACL) of 40 mandibular incisor teeth were determined. Then, the teeth were randomly divided into two groups (n = 20). Orthodontic metal brackets were applied in the first group, and no brackets, in the second group. The working length of each tooth was measured with an EAL under 3 test conditions according to the distance between the lip clip and sample tooth. Data were analyzed using one-way repeated measures analysis of variance and Tukey's post hoc tests (p = 0.05). In the bracketed samples, when the lip clip was located at 1 cm and 2 cm from the samples. The mean differences between the EAL measurements and ACLs were statistically higher than those when the samples were located 3 cm from the lip clip (p < 0.05). There were also statistically significant differences between EAL measurements and ACLs in the bracketed samples located 1 and 2 cm from the lip clip (p < 0.05). In the nonbracketed group, the differences between EAL measurements and ACLs were not statistically significant in the samples located 1, 2, and 3 cm from the lip clip (p > 0.05). Use of orthodontic metal brackets can negatively influence the accuracy of the electronic apex locator when the distance between the lip clip and bracket was short. A minimum of 3 cm distance should be kept between the lip clip and tooth in order to make consistent electronic measurements.

Measurement of the open apices of mandibular first and second premolars to test the chronological age over 14 years: Study on a sample of south Indian children.

Age estimation is an integral part of forensic medical and dental practice. In many countries, the age threshold of 14 years is set to determine the minimum age for criminal responsibility. In the present study, the authors studied the final maturation of the first (IPM1) and second mandibular premolars (IPM2) by Cameriere maturity index and determined cut-offs at the age threshold of 14 years, and validate on the test sample. Orthopantomograms of 960 healthy south Indian children and sub-adults (480 boys and 480 girls) aged between 10 and 18 were analysed, 640 as training sample and 320 as a test sample. The results of logistic regression analysis with age (

Location and shape of the apical foramina in posterior teeth: an in-vitro analysis.

PURPOSE: To analyze the morphology of shapes and positions of the apical foramina in permanent maxillary and mandibular posterior teeth. METHODS: Examination of the apical foramina was performed with a stereomicroscope at a magnification of 10×. The anatomic parameters evaluated were the shapes of the peripheral contours of the apical foramina (rounded, oval, asymmetric, and semilunar). The location of the apical foramen was recorded as a center, buccal, lingual, mesial, and distal surface. RESULTS: Results have shown that the frequency of deviation was 68% in all teeth being assessed, while the most frequent location of the apical foramen was in the center, with 32% followed by distal with 18%. The common shape of apical foramina was round shape in all the teeth. CONCLUSIONS: The variation in the location and shapes of apical foramina in teeth. The commonest deviation in location of apical foramina was distal and the frequent shape was of a round shape.

Micro-computed tomographic analysis of apical foramen enlargement of mature teeth: a cadaveric study / Análisis mediante micro-CT del ensanchamiento del foramen apical de dientes maduros: un estudio cadavérico

Revitalization procedures have been extensively studied during the last decade and offers several advantages over root canal treatment, such as the recovery of the natural immune system. Mature teeth have a small apical foramen diameter (AFD), which could impair the ingrowth of tissue into the root canal. We analysed three methods for apical foramen enlargement by instrumentation in in situ human teeth and evaluated the damage over hard tissues produced by the techniques. Tooth length (TL), defined as the length from the most coronal part of the crown to the point at which the file abandons the root canal, was calculated. Forty-four in situ teeth were randomized: Group I: instrumentation 0.5 mm coronal to TL; Group II: at TL level; Group III: 0.5 mm beyond TL. Teeth were instrumented up to K-file #80. The mandibles were scanned in a micro-CT device before and after treatment. Group I: Only 20 % of teeth presented an enlarged AFD, with augmentation of 0.09 mm. No damage to hard tissues was observed. Group II: 71.4 % of the teeth presented an enlarged AFD with augmentation of 0.42 mm. 35.7 % presented damage to periapical tissues. Group III: 86.7 % presented an enlarged AFD with augmentation of 0.43 mm. 46.7 % presented damage to periapical tissues. All groups presented similar prevalence of teeth with dentine thickness less than 1mm. All mandibular incisors presented areas of thickness less than 1mm. Instrumentation 0.5 mm beyond TL is the most effective technique.

La revitalización de dientes necróticos ha sido ampliamente estudiada durante la última década y ofrece varias ventajas sobre la endodoncia convencional, tal como la recuperación del sistema inmunitario natural del diente. Los dientes maduros tienen un diámetro de foramen apical (FA) pequeño, lo que podría afectar el crecimiento de tejido en el conducto. Se evaluaron tres métodos para la ampliación del foramen apical en dientes humanos in situ y se evaluó el daño sobre los tejidos duros producidos por las técnicas. Mediante radiografía periapical se calculó la longitud del diente (TL), definida como la longitud desde la parte más coronal de la corona hasta el punto en que la lima abandonó el conducto radicular. En el estudio fueron aleatorizados 44 dientes in situ: Grupo I: instrumentación 0,5 mm coronal a TL; Grupo II: a nivel TL; Grupo III: 0,5 mm más allá de TL. Los dientes fueron instrumentados hasta la lima K #80. Las mandíbulas se escanearon en un dispositivo de microCT antes y después del tratamiento. Grupo I: solo el 20 % de los dientes presentaron un diámetro de FA ensanchado, con un aumento de 0,09 mm. No se observó daño a los tejidos duros. Grupo II: el 71,4 % de los dientes presentaban un FA ensanchado con un aumento de 0,42 mm. El 35,7 % presentó daño a los tejidos periapicales. Grupo III: el 86,7 % presentó un FA ensanchado con un aumento de 0,43 mm. El 46,7 % presentó daño a los tejidos periapicales. Todos los grupos presentaron una prevalencia similar de dientes con un espesor de dentina inferior a 1mm. Todos los incisivos mandibulares presentaban áreas de grosor inferior a 1mm. La instrumentación 0,5 mm más allá de TL es la técnica más efectiva, aunque se debe tener especial consideración en aspectos como el debilitamiento de la estructura dentaria.

Quantitative Analysis of Root Canal System and Apical Part with Vertucci Type II Configuration Following Preparation with Three Different Preparation Systems: A Micro-computed Tomography Study.

OBJECTIVE: Isthmuses are narrow communications between root canals, and form as the result of the merging of the two root canals widening in a buccolingual direction. This widening causes the high ovality of isthmuses. The shaping and cleaning of all root canal systems are regarded as one of the major difficulties in long-oval shaped root canals. This study aims to make quantitative analysis of Vertucci type II root canal systems following preparation with Self- Adjusting file (SAF), Reciproc or Revo-S. METHODS: Major diameter and roundness values were measured at the level 1.2 mm from apical foramen before and after preparation. A 'post-preparation node' point was described when the minimum minor diameter value was smaller than major diameter of apical 1.2 mm. Data were analysed using one-way ANOVA, Tukey and Chi-square tests. RESULTS: Preparation resulted in a significant increase in the major diameter values regardless of the instrumentation (p = 0.000). Preparation with Reciproc led to the significant increase in roundness values (p = 0.000), whereas no significant difference was detected in specimens prepared with SAF (p = 0.21) and Revo-S (p = 0.15). CONCLUSION: Root canal preparation with SAF, Reciproc and Revo-S led to a significant increase in the major diameter of apical 1.2 mm and resulted in high frequencies of the post-preparation node.

Limitation of diagnostic value of cone-beam CT in detecting apical root isthmuses.

INTRODUCTION: Isthmuses are reported as common anatomic complexities in teeth often associated with failures in endodontic treatment. They should be considered before starting treatment and a preoperative computed tomography scan (CT) may demonstrate these complexities. OBJECTIVE: To assess the diagnostic value of the highest resolution settings of a cone-beam CT (CBCT) system in identifying and measuring apical isthmuses, using micro-CT as reference. METHODOLOGY: After micro-CT scanning, 40 humans' lower first molars with isthmuses in the apical-3 mm of mesial roots were scanned by the highest resolution settings of the New Generation i-Cat ® CBCT equipment. Two blinded observers recorded the detection of isthmuses in CBCT scans. The lengths of isthmuses were compared between micro-CT and CBCT to assess the diagnostic value of CBCT. Quantitative data for sensitivity were represented as percentages (95% confidence interval). The Bland-Altman method was used to assess differences between gold standard lengths (micro-CT) and CBCT lengths. RESULTS: BCT demonstrated 30 positive findings, representing sensitivity for isthmus identification of 75% (95% CI=0.4114-1.1364). Differences between the lengths in micro-CT (1.99±0.40 mm) and CBCT (1.53±0.41 mm) were significant (p<0.0001). CONCLUSION: The CBCT device used presented limited diagnostic value in the identification and measurement of apical isthmuses in the mesial roots of lower molars. In some cases, the actual anatomy of the apical root canal may not be completely delineated in this type of CBCT system, even using the highest resolution settings.

Micro-computed tomographic assessment of the variability and morphological features of root canal system and their ramifications.

OBJECTIVES: This study assessed the incidence and variability features of root canals system (RCS) and their ramifications according to Pucci & Reig (PR) (1944) and the American Association of Endodontists (AAE) (2017) by micro-computed tomography (µCT). METHODOLOGY: 500 representative extracted human teeth of each tooth group (n=50) (maxillary/mandibular central and lateral incisors, canines, first and second premolars and molars) were scanned by µCT with a resolution of 26.70 µm. The reconstructed cross-sections images and the visualization of the continuous slices in the transversal axis were performed using DataViewer software. RCS were classified according to Pucci & Reig (main canal, collateral canal, lateral canal, secondary canal, accessory canal, intercanal, recurrent canal) and AAE (main canal, accessory canal, lateral canal). The apical deltas were assessed for both classifications. The prevalence of apical deltas was evaluated using the Chi-squared test (p<0.05). RESULTS: According to PR, a higher incidence of lateral canals was observed in maxillary canines (10%), central incisors (8%) and first premolars (6%). Using AAE, the highest incidence of lateral canals was observed in the mandibular first premolars (85%), first and second molars (84%), lateral incisors (67%), canines (59%), and in maxillary first premolars (52%). Regarding accessory canals, the PR showed a frequency in 2% of the maxillary lateral incisors and maxillary and mandibular first premolars and 3% of mandibular first and second molars. On the other hand, the AAE showed the highest incidence of accessory canals in 86% of the maxillary first premolars, 71% in mandibular lateral incisors, 69% in mandibular first premolars, 65% in mandibular canines, and 56% in maxillary canines. The PR showed the lowest incidence of apical deltas for all dental groups when compared with AAE (p=0.004). Interestingly, distal canals in maxillary molars showed a significant discrepancy between classifications (p=0.027). CONCLUSIONS: µCT enabled accurately describing the RC system and related ramifications, adding to the PR and AAE classifications, with some discrepancies reported for maxillary molars. Clinical Relevance This µCT study enabled a thorough description of the variability among root canals and their ramifications, including clinically relevant details on the presence and location of lateral canals and accessories in all human tooth groups, beyond the currently existing classification systems.

Topographic Analysis of the Isthmus in Mesiobuccal and Mesial Roots of First Molars in a South Korean Population.

The purpose of this study was to evaluate the incidence and microscopic anatomy of the isthmus to provide more precise anatomical information about the mesiobuccal (MB) roots of the maxillary first molars and the mesial (M) roots of the mandibular first molars. Twenty-eight maxillary and 31 mandibular first molars were embedded, sectioned, stained, and observed at 30× magnification to evaluate the incidence and microscopic anatomy of the isthmus. The incidence of an isthmus 3 mm from the apex was 89.3% and 100% in the MB roots of the maxillary first molars and in the M roots of the mandibular first molars, respectively. The mean dentin thickness between the isthmus and the distal root surface was <1 mm at a distance of 3 mm from the apex in both types of roots. In this study, whenever two main canals were located in the MB roots of the maxillary first molars and in the M roots of the mandibular first molars, the likelihood of the presence of an isthmus increased. Therefore, clinicians should be aware of the thinnest dimensions in the distal surface of the MB roots of the maxillary first molars and the M roots of the mandibular first molars during nonsurgical and surgical root canal treatment.

The dimension and morphology of alveolar bone at maxillary anterior teeth in periodontitis: a retrospective analysis-using CBCT.

The morphology of the alveolar bone at the maxillary anterior teeth in periodontitis patients was evaluated by cone-beam computed tomography (CBCT) to investigate the distribution of alveolar defects and provide guidance for clinical practice. Ninety periodontitis patients and 30 periodontally healthy individuals were selected to determine the morphology of the alveolar bone at the maxillary anterior teeth according to the degree of bone loss, tooth type, sex and age. The differences in the dimensions between periodontitis patients and healthy individuals were compared, and the distribution of alveolar bone defects was analyzed. A classification system was established regarding the sagittal positions and angulations of the teeth. The buccal residual bone was thicker and the lingual bone was thinner in the periodontitis patients than in the periodontally healthy individuals, and there were differences between the different tooth types, sexes and age subgroups. The buccal undercut was close to the alveolar ridge, while fenestration was reduced and the apical bone height was higher in periodontitis patients than in periodontally healthy individuals. The apical bone height increased with the aggravation of bone loss and age. The proportions of different sagittal positions changed with the aggravation of bone loss. Moreover, the teeth moved more buccally regarding the positions of the maxillary anterior teeth. The morphology of the alveolar bone at the maxillary anterior teeth differed between periodontitis patients and healthy individuals, and the differences were related to the degree of bone loss, tooth type, sex and age.

Micro-computed tomographic assessment of the variability and morphological features of root canal system and their ramifications

Abstract Objectives This study assessed the incidence and variability features of root canals system (RCS) and their ramifications according to Pucci & Reig (PR) (1944) and the American Association of Endodontists (AAE) (2017) by micro-computed tomography (μCT). Methodology 500 representative extracted human teeth of each tooth group (n=50) (maxillary/mandibular central and lateral incisors, canines, first and second premolars and molars) were scanned by μCT with a resolution of 26.70 μm. The reconstructed cross-sections images and the visualization of the continuous slices in the transversal axis were performed using DataViewer software. RCS were classified according to Pucci & Reig (main canal, collateral canal, lateral canal, secondary canal, accessory canal, intercanal, recurrent canal) and AAE (main canal, accessory canal, lateral canal). The apical deltas were assessed for both classifications. The prevalence of apical deltas was evaluated using the Chi-squared test (p<0.05). Results According to PR, a higher incidence of lateral canals was observed in maxillary canines (10%), central incisors (8%) and first premolars (6%). Using AAE, the highest incidence of lateral canals was observed in the mandibular first premolars (85%), first and second molars (84%), lateral incisors (67%), canines (59%), and in maxillary first premolars (52%). Regarding accessory canals, the PR showed a frequency in 2% of the maxillary lateral incisors and maxillary and mandibular first premolars and 3% of mandibular first and second molars. On the other hand, the AAE showed the highest incidence of accessory canals in 86% of the maxillary first premolars, 71% in mandibular lateral incisors, 69% in mandibular first premolars, 65% in mandibular canines, and 56% in maxillary canines. The PR showed the lowest incidence of apical deltas for all dental groups when compared with AAE (p=0.004). Interestingly, distal canals in maxillary molars showed a significant discrepancy between classifications (p=0.027). Conclusions μCT enabled accurately describing the RC system and related ramifications, adding to the PR and AAE classifications, with some discrepancies reported for maxillary molars. Clinical Relevance This μCT study enabled a thorough description of the variability among root canals and their ramifications, including clinically relevant details on the presence and location of lateral canals and accessories in all human tooth groups, beyond the currently existing classification systems.